روت htc desire 10 pro منقول

روت htc desire 10 pro منقول

htc desire 10 pro ROOT

شرح روت htc desire 10 pro

 الروت صالح للإصدار اندرويد 6

اولا يتم فك البوتلودر عبر الموقع التالي

ثانيا يتم تفليش الريكفيري المعدل التالي


ثالثا يتم تثبيت ملف الروت عبر الريكفيري المعدل 



1. First install device drivers and download ADB fastboot from this thread
2. Dowload TWRP 3.1 for your phone variant from here and move it to the ADB fastboot folder and rename the img file to "twrp"

3. Press shift + right click and select open command window here.
4. Go to developer options on your phone and select Allow USB debugging and Allow bootloader to be unlocked.
(Very important step)
5. Connect the phone to your PC and check the connection by typing the following in the command prompt.
adb devices
If it shows only one device, you're good to go!!
Otherwise remove any other connected phones/devices and disable any Android emulators if you have them. (Like Bluestacks)
6. Go to HTCDev website and unlock your bootloader, (HTCDev will give those instructions), the phone model isn't shown but select "other supported models".
(Warning - This will erase all your data so make a backup)
7. Type the following into the command window to boot your device into bootloader/fastboot mode:
adb reboot bootloader
8. Once your device boots into bootloader mode, type this into the command line.
fastboot flash recovery twrp
9. Once TWRP is successfully flashed on your device, type this final command to reboot your device.
fastboot reboot
10. Download SuperSu latest version   SuperSu v2.82
11. Copy the SuperSu zip file to your phone internal storage
12. Then type this command to go to TWRP,

fastboot reboot recovery

13. Wait for TWRP to load and tap Install
14. Select the SuperSu zip file and flash it
15. After flashing finishes, tap on Reboot System
16. Congradzz !!! Your HTC Desire 10 Pro is rooted now.
Now you can further customize if you like by installing Xposed.



ليست هناك تعليقات