Huawei Y6p MED-LX9 Firmware-Auth-DA file-test point

Huawei Y6p MED-LX9 Firmware-Auth-DA file-test point

Hi there welcome to 5G MOBILE site. In this post we will talking about Huawei Y6p 2020 MED-LX9 flash file firmware. If you need more file for Huawei Y6p MED-LX9 please leave a comment.


Med-lx9 oem file-فلاشة-da-auth-files-test


Huawei Y6p MED-LX9 Firmware-Auth-DA file-test point





You must install a Huawei Y6p 2020 MED-LX9 ROM based on your model number, flash it on your smartphone or tablet and enjoy the Android experience again.
It can repair also:-
  • A corrupted Huawei phone parts like WIFI , Bluetooth.
  • Fix Hang on logo or boot loop phone.
  • Stuck on recovery mode problem.
  • Crashed system or program's mobile.
  • Upgrade system version to higher edition.

So you should make software for Huawei Y6p stock roms to get your mobile back to a working condition again.



Flashing Huawei Y6p 2020 MED-LX9  STOCK Firmware




Flash Huawei Y6p 2020 Firmware Via Recovery Mode

Your Huawei Smartphone should have at least 20-30 percent of battery to perform the process and a Micro SD Card (must).
  • Flash firmware on Huawei Smartphone (Card )
  • Create a new folder on your Micro Card and rename it to dload.
  • Download and extract Huawei firmware (for your piece) on your Computer. After extracting you will be able to see these files. Now Copy UPDATE.APP and paste it the dload folder on your Micro card. Now Power Off your Huawei Smartphone. Now, Press Volume UP, Volume Down and Power Button at the same time for 5-8 seconds until the process is started automatically.
  • Update Process may takes 5-10 minutes to complete. Once Process is completed your device will reboot automatically and ready to use.


Install Huawei Y6p 2020 MED-LX9 Firmware file by using  SP Tool

follow step by step
  • Install usb driver before beginning.
  • Run the exe
  • Click on Scatter-loading, find and locate the Scatter File and press Open.
  • Click on Download button.
  • Turn off your Huawei mobile.
  • Remove the battery (if removable)
  • Connect your Huawei to your PC via USB cable.
  • You will see this info and the process automatically starts
  • Wait for finishing process done successfully Update Huawei Stock Rom.


Huawei Y6p 2020 MED-LX9 official full firmware free link to download



An Official Huawei Y6p 2020 MED-LX9 firmware









Huawei Y6p MED-LX9 Test Point



google-playkhamsatmostaqltradent