Huawei Y5 Prime 2018 DRA-LX2 Firmware Scatter


Huawei Y5 Prime 2018 DRA-LX2 Firmware Scatter

Hi there welcome to 5G MOBILE site. In this post we will talking about Official Huawei Y5 Prime 2018 DRA-LX2 firmware flash files with mega links. And you can get Board rom and DA-AUTH file with remove FRP bypass and fix IMEI files. If you need more firmware file for Y5 Prime 2018 DRA-LX2 please leave a comment.

YP-LX-CERP firmware emui-yp-download-visits-featured

You must install a Y5 Prime 2018 DRA-LX2 stock firmware based on your model number, flash it on your smartphone or tablet and enjoy the Android experience again.
It can repair also:-
  • A corrupted Huawei phone parts like WIFI, Bluetooth, IMEI sim.
  • Fix Hang on logo or boot loop phone.
  • Stuck on recovery mode problem.
  • Restore Crashed system or dead mobile.
  • Upgrade system version to higher edition or downgrade to lower edition to reset FRP DRA-LX2 (bypass google account)

So you should make software for Y5 Lite DRA-LX5 STOCK ROMs to get your mobile back to a working condition again.

How to flash Huawei DRA-LX2 firmware

Installing Huawei Y5 Prime 2018 DRA-LX2 Firmware Via Recovery Mode

Your Huawei Smartphone should have at least 20-30 percent of battery to perform the process and a Micro SD Card (must).
  • Make soft firmware on Y5 Smartphone (Card )
  • Create a new folder on your Micro Card and rename it to Dload.
  • Download and extract Huawei firmware (for your piece) on your Computer. After extracting you will be able to see these files. Now Copy UPDATE.APP and paste it the Dload folder on your Micro card. Now Power Off your Y5 Smartphone. Now, Press Volume UP, Volume Down and Power Button at the same time for 5-8 seconds until the process is started automatically.
  • Update Process may takes 5-10 minutes to complete. Once Process is completed your device will reboot automatically and ready to use.

Flashing Huawei official firmware scatter file by using SP Tool

To flash firmware follow step by step
Setup usb driver before beginning.
  • Run the exe.
  • Click on Scatt-loading, find and locate the File and press Open.
  • Click on Download button.
  • Turn off your Huawei mobile.
  • Out the battery (if removable)
  • Connect your Huawei to your PC via USB cable.
  • You will see this info and the process automatically starts.
  • Wait for finishing process done successfully Update Y5 Prime 2018 Stock Rom.

Huawei DRA-LX2 AUTH & DA File Link

Huawei DRA-LX2 FRP bypass

Huawei Y5 Prime 2018 8.0 IMEI Repair C185

Huawei Y5 Prime 2018 DRA-LX2 firmware flash file downloads

Y5_Prime_2018_DURA-LX2_MT6739_27032019.zip Stock Download


Huawei_Y5_Prim_2018_DRA-LX2_MT6739_1.0.0.138_C10_EMUI-8.0.0_150319_8.1.0 firmware Link

Dra-lx2 full dump by unlocktool

Huawei Y5 Prim 2018 DRA-LX2 Board Rom

Huawei Y5 Prim 2018 DURA-Dra-L22 Dura-L22-BD Board Software general NA Google 05022JEL Secro + MTK AllInOne DA firmware Download Link

  • Read also: 


No comments